ARTEMIDE architectural 2019

90° MacAdam 3SDCM Life L70 (6K) >36300h CRI =80 Antrhracite Grey AS IP 65 IK 07 ø137 ø76 280 170 142 160 76 255 Code T419800W00 W Weight Beam Flux CCT 24 W 3,9 kg AS 1760 lm 3000K For further information on Cariddi Palo visit artemide.com Cariddi palo Ernesto Gismondi 2014 C A R I D D I P A L O An adjustable direct lighting appliance that consists of a pole joint and an adjustable lighting body. Fixed into position with 6 grub screws. The pole, not included, should have a 60mm spigot to allow appropriate fixing of the pole head. The pole should be 4m high to ensure appropriate surface illumination. Under these conditions, poles can be installed 15m apart to illuminate a 4m lane, in order to ensure compliance with class S3 for cycling lanes. Cabling should be accommodated within the pole head, accessible through a lid, using an IP67 sealed connector fit for cables with 5 to 13.5mm diameters. The lighting body is powered through a H05RN-F 2x1 cable. Aluminium EN AB47100 head, pole joint, and sealing caps; aluminium EN AW6060 body and glass-holding ring, silicon gaskets. Electronic power unit inside the body. Suited for public use, protected for 4kV surges, both in the common and in the differential mode. Moulded silicon road lighting appliance. The tempered glass diffuser glued flush to the lighting body ensures the absence of lighting pollution. INOX AISI 316 steel screws. Die-cast aluminium elements painted with 3-stage outdoor treatment: nanotechnologies, anti-oxidizing primer, polyester paint. The technical features of the appliances comply with the EN60598-2-3 norm. 938 939