ARTEMIDE architectural 2019

180° 130° MacAdam 2SDCM Life L70 (10K)>36300h CRI =80 F S WF Antrhracite Grey IP 65 IK 07 CARIDDI 30 OPTICS 16° - 35° CARIDDI 40 OPTICS 17° - 36° CARIDDI 30 / CARIDDI 40 OPTICS 12° Ø135 260 256 41 76 160 Ø135 260 256 41 76 160 CARIDDI 30 CARIDDI 40 Code T418610W00 T418620W00 T418640W00 Code T418710W00 T418720W00 T418740W00 W Weight Beam Flux CCT 28 W 3,9 kg S 12° 229 lm 3000K F 16° 1638 lm 3000K WF 35° 1468 lm 3000K W Weight Beam Flux CCT 41 W 3,9 kg S 12° 356 lm 3000K F 17° 2322 lm 3000K WF 36° 2405 lm 3000K For further information on Cariddi visit artemide.com Cariddi Ernesto Gismondi 2013 C A R I D D I Floor, wall, ceiling, eaves installation. Consists of an adjustable lighting unit and terminal board. Positioning is maintained by means of locking dowels. The base and the lighting unit are connected by a H05RN-F 3x1 cable. EN AB47100 aluminium head and terminal board, EN AW6060 aluminium body, silicone gaskets. Electronic ballast integrated in the body. Silicone-sealed silk-screened tempered glass. Wiring to be performed inside the terminal board by piercing an IP65 grommet suitable for 8-12 mm diameter cables. LED COB with PMMA lens and anodized aluminium reflector in 3 different beam versions. The optical unit in the narrow-beam version is made up of a N-SF15 optical glass condensation lens and an external PMMA projection lens glued flush with the closing bezel of the lighting body. Available in 2 different powers. All the screws used outside the product are in AISI 316 stainless steel. All the components in die-cast aluminium are painted with 3-stage outdoor treatment: nanotechnologies, anti-oxidizing primer, polyester paint. Technical features of the light fixtures in compliance with EN60598-1 and section 2-5. 220/240Vac 50/60Hz electronic ballast included 934 935