ARTEMIDE architectural 2019

MacAdam 4SDCM Life L70 (6K)>39300h CRI =80 Antrhracite Grey 10 Grey-white Ral 9002 00 WW IP 65 IK 10 Code T418200W. 00/10 W Weight Beam Flux CCT 41 W 2,1 kg AS 1848 lm 3000K 142 4000 195 61 332 ø76 ø486 1 485 4000 195 ø 75 ø 60 90 a h L LED 40W Lighting application h L a Em Emax Emin 4.0 m 4.0 m 15 m 13 lux 27 lux 2.3 lux For further information on Cefiso Palo visit artemide.com Cefiso Palo Alessandro Pedretti (Studio Rota & Partners) 2011 C E F I S O P A L O Electronic ballast integrated in the body. The light fixture is protected from impulse overvoltage up to 4KV both in differential and common mode. Silicone-sealed silk-screened tempered glass. IP67 connector for electric connection to the mains, it can be housed in the pole compartment and is suitable for cables with a diameter of 5-13.5 mm. LED circuits with PMMA lenses with road emission beam. Screws in AISI 316 stainless steel. All parts in die-cast aluminium and galvanised iron are painted with 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint. Technical features of light fixtures in compliance with EN60598-1. Light fixture with adjustable direct emission, with high-performance LED light sources. Pole installation. Available in two finishes: light grey painted and anthracite grey painted. Consists of lighting unit and pole support. Fixing is maintained by means of locking dowels. The pole, not supplied, must have a ø 60 mm and h90 mm shank to correctly fix the head- pole. The pole height must be 4 m from the ground to provide a correct surface lighting. In this way, the poles can be installed at a distance of 15 m, suitable to light a 4 m carriageway in compliance with S3 class for cycle tracks. Body in EN AB44100 aluminium, pole support in galvanized iron, silicone gaskets. 220/240Vac 50/60Hz electronic ballast included Suitable for street lighting in the class S3 (bike paths). 930 931