ARTEMIDE architectural 2019

AS MacAdam 4SDCM Life L70 (6K) = 51400h CRI =80 F S Antrhracite Grey IP 65 IK 10 80° 320 60 653 Code T418410W00 T418423W00 T4184ELW00 W Weight Beam Flux CCT 106 W 8,3 kg S 9° 9183 lm 3000K F 24° 9276 lm 3000K AS 8795 lm 3000K S O S T I T U T O S P O T For further information on Sostituto Spot visit artemide.com Sostituto Spot Ernesto Gismondi 2013 Light fixture with direct emission, with monochromatic LED light sources. Floor, wall, eaves installation. Consists of lighting unit composed by 3 interchangeable optical units, wiring terminal board and fixing plate. Positioning is maintained by means of locking dowels. Tilting with 5° adjustments. Positioning is ensured by means of fastening screws. EN AB47100 aluminium body and terminal board, silicone gaskets. Electronic ballast integrated in the body. Polycarbonate diffuser silicone-sealed to the lens supporting unit. Spot optic Flood optic Concentrated luminous flow to highlight details avoiding unwanted light dispersion. Wide luminous flow suitable for lighting large areas. 220/240Vac 50/60Hz electronic ballast included IP68 connector for the electrical connection to the mains, which can be located in the base compartment and is suitable for 5-13.5 mm diameter cables. LED circuits with PMMA lenses in 3 beam versions: 9°, 24° and elliptical 12x40°. All the screws used outside the product are in AISI 316 stainless steel. All the components in die-cast aluminium are painted with 3-stage outdoor treatment: nanotechnologies, anti-oxidizing primer, polyester paint. Technical features of the lighting fixtures in compliance with EN60598-1 and section 2-5. Protection level from 4KV impulse overvoltage. 918 919